transfer contact
英 [trænsˈfɜː(r) ˈkɒntækt]
美 [trænsˈfɜːr ˈkɑːntækt]
转移接触；转移接点
双语例句
- You can always transfer your primary company contact designation to someone else in your company after they have a membership login.
你随时可以把你的公司主要联系人身份转交给公司其他人，只要他们完成了成员注册。 - The results indicate that many symmetry factors are the important reasons of the material transfer in electric contact.
结果表明，接触过程中各种因素的不对称是产生材料转移的主要原因。 - Have the patient of hepatitis of chronic activity sex or hepatitis of chronic defer sex, uniform transfer food of direct contact entrance, tableware or cheeper work.
患慢性活动性肝炎或慢性迁延性肝炎的患者，一律调离直接接触入口食品、食具或幼儿工作。 - A new method of enhancing heat transfer in grinding contact zone with jet impinging is presented on the basis of analysis on the mechanism of workpiece burn in creep feed grinding.
在分析缓进给磨削时烧伤机理的基础上，提出了高压射流冲击强化磨削弧区换热的创新构想，并通过传热学基础实验研究了射流冲击强化换热的传热特征。 - Comparison of Process Characteristics of Air-Water Heat-Mass Transfer in Direct Contact Forward Flow and Backward Flow
空气与水直接接触热质交换顺流和逆流过程特性比较 - The transfer modes of contact material and the cause of reversion of transfer direction are discussed.
研究了触头材料转移模式及转移方向的反转原因。 - Uniqueness and oscillation problems for coupled analysis between stable heat transfer and contact processes
利用动态模拟研究电力系统振荡的方法稳态传热与接触耦合问题解的唯一性与迭代算法的振荡性 - Experimental results show that the technology of enhancing heat transfer by jet impinging is a valid method of raising the efficiency of heat transfer of grinding contact zone and it will be widely applied to solve the problem of grinding burn of difficult to machining materials.
结果表明，射流冲击强化换热技术可有效提高弧区换热效率，在解决难加工材料磨削烧伤方面具有广阔的应用前景。 - And then by using the Coulomb friction law, the force transfer model of the contact surface between the stator and the rotor was derived; the inter-relationship between contact angles, the frictional material characteristic, the preload and the vibration amplitude were analyzed.
利用库仑摩擦接触理论建立了定、转子之间的力传递模型，并探讨了接触角与定、转子预压力、振动幅值、摩擦材料弹性刚度之间的关系，给出了电机稳态时的输出力矩表达式。 - Experiment Research on Enhancing Heat Transfer of Grinding Contact Zone through Jet Impinging During Intermittent Creep Feed Grinding
断续缓磨射流冲击强化磨削弧区换热的实验研究 - Two kinds of variational principles for the two different problems, i.e. heat transfer and contact analysis, are respectively put forward for solving of the coupled problems.
另一类是热弹性接触分析的参数变分原理，可以方便地对接触问题进行求解。 - In the 4th chapter, it describes the crystal instruction and the thermodynamic characteristics of the gas hydrate, it also discusses the phase equilibrium of hydrate, the heat and mass transfer of direct contact heat exchange in theory.
论文第四章对气体水合物的晶体结构和热力性质进行了研究，并对气体水合物的相平衡、直接接触式气体水合物反应的传热传质等问题进行了理论探讨。 - In order to study the influence of surface-free-energy difference of solid surface and condensate on the filmwise condensation heat transfer performance, a correlation of the condensation heat transfer coefficient with contact angle has been derived with respect to liquid film flow and heat transfer at vapor-liquid interface.
为了考察固液表面自由能差对膜状冷凝传热系数的影响，本文从液膜流动的角度出发，推导出了接触角与冷凝传热系数的关联式。 - The deformation of two contacting plates irradiated by laser can influence heat transfer by contact obviously. The effect of atmospheric pressure on heat transfer by contact are analyzed by some experiments and numerical simulations.
考虑激光辐照下结构变形对双层板接触传热影响可以更真实地反映两板间的传热情况，通过实验和数值模拟分析了大气压力对接触传热的影响。 - On the basis of supposing the one-dimensional heat conduction thermal resistance of the lubricating oil, the movement relation between piston and jar set studied are. heat transfer contact model between them, for improving performance of the internal combustion engine points out the direction further setis up.
在对润滑油一维导热热阻假设的基础上，通过对活塞和缸套运动关系的研究，建立了活塞-缸套之间的传热联系模型，为进一步提高内燃机性能指明了方向。 - Effect of atmospheric pressure on heat transfer by contact between two plates under laser irradiation
大气压力对激光辐照双层板接触传热的影响 - The influence of pore size distribution on mass transfer in direct contact membrane distillation ( DCMD) was investigated.
文中考察孔径分布的存在对直接接触式膜蒸馏跨膜传质速率的影响。 - A suitable value of air space can be chosen within such a range as 1/ 133 to 1/ 60 of the height of glass wall in order to minimize the heat transfer without glass contact due to external pressure.
基于这种方法该双层幕墙结构的最佳中空间隙可选择的数值为幕墙高度的1/133至1/60倍，此时可确保热量传导最小且使玻璃结构受外力时，内外层二层玻璃不致接触。 - Heat Transfer on the Contact Surfaces with Frictional Heating Study on interface electric resistance of electro-osmotic consolidation
摩擦接触界面传热规律研究 - Effect of pore size distribution on mass transfer in direct contact membrane distillation
膜孔径分布对直接接触式膜蒸馏传质速率的影响 - The principle was presented of the liquid films formed with the new two phase down flow medium on the fiber silk and realizing the mass transfer of film surface contact.
介绍了一种新型两相顺流介质在纤维丝上形成液膜，实现膜面接触传质的原理。 - Reviewing the theoretical and experimental research advancement of direct contact evaporating heat transfer of a single drop, and the whole heat transfer in direct contact heat transfer appliance.
综述了直接接触式换热中单个液滴蒸发换热的理论与试验研究进展情况，以及在直接接触式换热器的整体换热研究进展状况。 - The thermal mechanical analysis for the coupled problems of interaction between heat transfer and contact processes can be found in many engineering fields.
考虑传热接触耦合作用的热力学分析问题大量存在于工程中，分析的难点是必须考虑热与可移动接触边界间的耦合作用。 - However, it is proved during engineering practice that the adhesion between the layers of the pavement structure is poor, the adhesion quality is between absolutely slippery and whole continuous, and the interface transfer force by contact.
然而，工程实践证明，沥青混凝土层与水泥稳定层之间以及沥青混凝土层之间的层间界面粘接比较薄弱，处于完全滑动与完全连续的中间状态，层与层之间通过接触传递应力。 - Experiment Research on Enhancing Heat Transfer of Grinding Contact Zone by Radial Jet Impinging
磨削弧区采用径向射流冲击强化换热的试验研究 - The finite element analysis for coupled problems between heat transfer and contact processes
传热与接触两类问题耦合作用的有限元分析 - Numerical simulation for heat transfer and contact problems with a thermal-resistant constitutive model
具有界面热阻的接触传热耦合问题的数值模拟 - It is showed that when the velocity was low, self-suction phenomenon cannot be caused. Therefore, the major influences on oxygen transfer were liquid-gas contact time and contact area.
研究表明，当膜管程中水力流动线速度较小时，不足以引起自吸现象，影响充氧效果的主要因素是气液相的接触时间和接触面积。 - Apply water distributor device and applied by the replenishment brush composed of the former painting brush and heat transfer through the contact point parts of additional evaporation of water spray, which spray water in the heat exchanger so that the surface of film.
涂抹布水器由补水器和涂抹刷组成，前者通过对涂抹刷与换热器接触部位进行定点喷淋补充蒸发水量，后者使喷淋水在换热器表面形成覆膜。 - The quantitative relationship between heat transfer coefficient and contact pressure was also given in this paper.
同时还给出了热传导系数与接触压力之间的定量关系。